This category covers the technical, operational, and regulatory aspects of EnerTherm Engineering’s LitBurn LBI series incinerators, specifically engineered for the destruction of municipal solid waste (MSW), commercial refuse, and industrial by-products. Content in this category focuses on the management of mixed waste streams, including plastics, paper, textiles, packaging, and high-moisture organics. Articles should detail the LBI series' performance metrics, such as its 125–500 kg/h throughput capacity, 850–1,200°C combustion temperatures, and the 95–97% volume reduction achieved through 3–5% ash residue. Technical discussions should highlight the dual-chamber design, Coretex refractory lining, and the IP6X-rated PLC control systems that enable real-time data logging and predictive maintenance. Furthermore, this category explores EnerTherm’s commitment to sustainability and energy recovery, covering hydrogen-ready burner technology, multi-fuel compatibility (natural gas, LPG, diesel, biofuel), and integrated systems for water pre-heating, steam generation (2–10 bar), and electrical output (3–15 kW). Content must address compliance with the Waste Incineration Directive (WID), Environmental Permitting Regulations (EPR 2016), and the EU Industrial Emissions Directive (IED). Authors should also provide guidance on operational efficiency, such as the 30-minute heat-up time, the use of waste pre-dry systems to reduce fuel consumption, and best practices for the 3–6 month maintenance cycles involving burner and refractory inspections.