Typical resource cost reduction through granular consumption visibility.
Independent meter logging provides audit-ready billing verification data.
Electricity, gas, water, steam, and compressed air monitoring from one unit.
Utility
Management
Record & analyse electricity, gas & water meter data for accurate billing & resource management.
The EcoLog EL-2 consolidates all utility meter readings into a unified monitoring platform — delivering precise resource management, billing verification, and consumption pattern analysis across electricity, gas, and water.
Utility Monitoring
Applications
Select an application to see how the EcoLog transforms utility data management.
Monitor single and three-phase electricity consumption at facility, department, or equipment level. The EcoLog captures half-hourly and sub-second profiles revealing peak demand periods, baseload patterns, and load factor opportunities — enabling tariff optimisation, demand charge reduction, and accurate cost allocation.
Billing Verification
Independent records for dispute resolution
Peak Demand Analysis
Identify and reduce demand charges
Sub-Metering
Department-level cost allocation
Carbon Reporting
ISO 14001, SECR & ESOS support
Built for
Utility Monitoring
Key advantages of EcoLog for resource management.
Multi-Utility Dashboard
Unified view of electricity, gas, and water consumption with real-time readings, historical trends, and benchmark comparison on PowerBi.
Billing Accuracy
Independent meter data logging provides audit-ready records for utility bill verification and dispute resolution — recover overcharges.
Leak & Waste Detection
Continuous monitoring identifies abnormal consumption patterns indicating leaks, equipment faults, or operational waste.
Peak Demand Analysis
Identify peak consumption periods and load profiles to optimise tariff selection and reduce demand charges by up to 30%.
Automated Reporting
Scheduled reports on consumption, costs, and carbon emissions for management review and regulatory compliance.
Sub-Metering Support
Monitor consumption at department, line, or equipment level for accurate cost allocation and accountability.
Utility
EcoLog FAQ
Common questions about EcoLog for utility monitoring and resource management.
The EcoLog supports pulse output meters, Modbus meters, M-Bus meters, and analog signal meters for electricity, gas, water, steam, and compressed air. Its versatile I/O and protocol support ensures compatibility with virtually any metering device.
Yes. Data from multiple EcoLog units can be consolidated into a single cloud dashboard, enabling centralised monitoring and comparison across sites, buildings, or departments.
By providing granular consumption visibility, the EcoLog identifies peak demand periods, waste patterns, and equipment inefficiencies. This data enables targeted interventions that typically achieve 15-25% cost reductions.
Yes. The EcoLog provides the consumption data needed for carbon emissions calculations and reporting, supporting ISO 14001, SECR, and ESOS compliance requirements.
Yes. Continuous water meter monitoring identifies abnormal consumption patterns — such as constant flow during non-operational hours — that indicate leaks or equipment faults.
Most EcoLog utility monitoring installations achieve payback within 6-12 months through billing error identification, peak demand reduction, and waste elimination.
Smarter
Resources
Deploy the EcoLog for real-time utility monitoring, billing verification, and resource optimisation.
- Multi-utility metering
- Billing verification
- Consumption analytics
- Carbon reporting