High-capacity heat transfer for maximum energy recovery from manufacturing exhaust streams.
Wide operating temperature range covering all manufacturing process exhaust conditions.
Contact
Advanced flue gas water recovery with self-draining condensate management and smart control.
General Manufacturing
Condensation
EcoRec condensers for stack heat recovery, water reclamation, and energy efficiency.
Purpose-built EcoRec direct contact condensers for general manufacturing environments. Recover water vapour and heat from boiler stacks, process exhausts, and drying systems — reducing utility costs, reclaiming water, and improving facility-wide energy efficiency across all manufacturing sectors.
Manufacturing
Applications
Select an application to see how EcoRec condensers address your specific heat and water recovery requirements.
Manufacturing facilities exhaust significant thermal energy through boiler stacks, process heater flues, and ventilation systems. EcoRec direct contact condensers cool these exhaust streams below dew point, capturing water vapour and recovering latent heat energy. The recovered heat pre-heats boiler feed water, combustion air, or space heating — delivering measurable savings on gas and electricity costs.
Universal Compatibility
Integrates with any manufacturing exhaust system
Self-Draining Design
Advanced weir system prevents buildup and blockages
Smart VSD Control
Automated fan speed adjustment for optimal recovery
Modular Expansion
Scale recovery capacity as production grows
Built for
Manufacturing Recovery
Key advantages of EcoRec condensers for general manufacturing heat and water recovery.
Stack Heat Recovery
Recover latent heat from boiler and process stacks — pre-heat boiler feed water, combustion air, or building heating systems to cut gas consumption by up to 30%.
Water Reclamation
Capture clean water vapour from exhaust streams for process reuse. Reduce mains water consumption, effluent volumes, and associated utility costs across the facility.
Universal Design
Compatible with any manufacturing exhaust system — boiler stacks, process heaters, drying systems, ventilation ducts. Modular design adapts to facility-specific requirements.
Smart Control System
Real-time monitoring with VSD-driven extraction fans automatically optimises recovery rates based on production schedules — no manual adjustment required.
Scalable Investment
Start with a single exhaust point and expand recovery to additional stacks as production grows. Modular construction makes phased investment practical and cost-effective.
Long Service Life
High-grade stainless steel tubes with optional corrosion-resistant coatings deliver decades of reliable service with minimal maintenance requirements.
Your Condenser
Pays You Back
Built-in heat recovery captures waste energy from stack condensation and redirects it back into your facility — cutting utility costs and improving energy efficiency.
Stack Heat Becomes
Free Energy.
Every EcoRec condenser recovers substantial thermal energy during flue gas condensation. Instead of exhausting that heat to atmosphere, our integrated recovery systems capture it and redistribute it across your facility — pre-heating boiler feed water, warming combustion air, or supplementing building heating.
Recovered exhaust heat raises boiler feed water temperature — reducing fuel consumption and improving overall boiler efficiency by 10–20%.
Warm incoming combustion air for boilers and process heaters — every 20°C increase in air temperature saves approximately 1% on fuel costs.
Generate 60–85°C hot water from waste heat for cleaning, washing, and process applications — displacing dedicated gas-fired water heaters.
Low-grade recovered heat feeds into factory heating systems — reducing winter gas bills across production halls, warehouses, and offices.
Manufacturing
Recovery
FAQs
Common questions about EcoRec condensers for general manufacturing heat and water recovery.
Ready to
Recover?
Our engineering team will assess your exhaust streams and design the optimal heat and water recovery solution for your manufacturing facility.
- Stack heat recovery
- Water reclamation
- Energy efficiency solutions
- Multi-point recovery planning