High-capacity heat transfer for maximum energy recovery from pharmaceutical process exhaust.
Wide operating temperature range covering all pharmaceutical drying and process conditions.
Contact
Advanced water recovery with self-draining condensate management and smart GMP-ready control.
Pharmaceutical
Condensation
EcoRec condensers for clean water recovery and GMP-compliant condensation systems.
Purpose-built EcoRec direct contact condensers for pharmaceutical environments. Recover clean water from process exhaust, maintain GMP-compliant condensation standards, and recapture process heat — all while meeting the stringent hygiene and validation requirements of pharmaceutical manufacturing.
Pharmaceutical
Applications
Select an application to see how EcoRec condensers address your specific recovery and compliance requirements.
Pharmaceutical manufacturing processes — granulation dryers, fluid bed processors, coating systems, and autoclaves — exhaust clean water vapour at elevated temperatures. EcoRec direct contact condensers capture this vapour, producing clean condensate suitable for reuse in non-critical applications such as cooling, cleaning, and HVAC systems. This reduces purified water demand and operational costs.
Pharma-Grade Construction
Stainless steel 316L with documented Ra ≤ 0.8 μm surface finish
Validated CIP System
GMP-compliant automated cleaning with full documentation
IQ/OQ/PQ Packages
Complete validation documentation for regulatory submissions
BMS Integration
Smart controls interface with Building Management Systems
Built for
Pharma Manufacturing
Key advantages of EcoRec condensers for pharmaceutical water recovery and process heat recapture.
Clean Water Recovery
Capture clean water vapour from pharmaceutical process exhaust for reuse in non-critical applications — reducing purified water demand and WFI system load.
GMP Compliance
Full stainless steel 316L construction with documented surface finish, validated CIP systems, and comprehensive IQ/OQ/PQ documentation packages for regulatory audit readiness.
Process Heat Recapture
Recover latent heat from dryer and process exhaust for HVAC pre-heating, clean room air handling, or process water heating — reducing the facility's energy footprint by up to 25%.
Smart BMS Integration
Control systems interface with Building Management Systems for integrated energy optimisation across pharmaceutical manufacturing and clean room environments.
Validated Systems
Complete qualification documentation — Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) — supporting MHRA, FDA, and EMA regulatory submissions.
Contamination Prevention
Self-draining condensate management with validated CIP cleaning prevents cross-contamination between batches. Hygienic design principles throughout ensure product safety.
Your Condenser
Pays You Back
Built-in heat recovery captures waste energy from process exhaust condensation and redirects it back into your facility — cutting energy costs while maintaining GMP compliance.
Process Exhaust Becomes
Facility Energy.
Pharmaceutical drying, coating, and sterilisation processes exhaust substantial thermal energy. Instead of venting that heat to atmosphere, our EcoRec condensers capture it and redirect it — pre-heating HVAC supply air, supplementing hot water systems, or supporting WFI generation pre-heat stages.
Recovered heat warms incoming HVAC air for cleanroom environments — reducing the load on primary AHU heating coils and cutting energy consumption.
60–85°C hot water generated from waste heat for clean-in-place systems and WFI pre-heating — reducing steam demand from pharmaceutical boilers.
Recovered heat raises incoming water temperatures for process applications — reducing boiler load and improving overall facility energy efficiency.
Low-grade recovered heat feeds into building heating systems — reducing winter gas costs across production areas, warehouses, and office spaces.
Pharma
Industry
FAQs
Common questions about EcoRec condensers for pharmaceutical water recovery and compliance.
Ready to
Recover?
Our engineering team specialises in pharmaceutical condensation. Tell us about your process exhaust conditions, GMP requirements, and energy recovery targets.
- Clean water recovery
- GMP-compliant condensation
- Process heat recapture
- Validation documentation